Proper Placement and Installation Techniques

Proper placement and installation techniques for ridge caps and hip shingles are popular. Proper placement and installation of ridge caps and hip shingles ensure longevity in using the roofing system. Here are the steps for correctly placing and installing ridge caps and hip shingles:

• Roof Preparation: Before installing ridge caps and hip shingles, you must prepare the roof deck and framing. The roof deck should be clean and free of any debris. Also, ensure to secure the roof framing.
• Roof Measurement: Measure the length of the ridge or hip to be covered. After measuring the size of the ridge or hip, you will be able to determine the number of ridge caps or hip shingles needed.
• Roof Cutting: Cut the ridge cap or hip shingles to appropriate lengths. Consider the slope of the roof and the overlap requirements for the shingle.
• Roof Nailing: Nail the ridge cap or hip shingles in place. Start nailing at the center of the ridge or hip, then work outwards. Ensure roofing nails are compatible with the type of shingle in use. Drive nails at the recommended spacing.
• Roof Sealing: Seal the ridge cap drip edges or hip shingles with roofing cement. The roofing cement prevents water from infiltrating the roofing system.

Learn More : Proper Placement and Installation Techniques

The post Proper Placement and Installation Techniques first appeared on Innercity Roofing 

Source : https://innercityroofers.com/roof-installation/